Aquaquad AQ25 - Jet Ski / Pwc / Rib Uses 10 To 25HP Standard Outboard Engine

AquaQuad AQ25 The AquaQuad AQ25 offers you, the rider, a smooth comfortable ride at any speed.It is suited for 1 or 2 persons. There is an ample amount of storage capacity underthe riders seat and the optional front hatch. This AquaQuad AQ25 has an integralfuel tank, 2 flush mount rod holders and all the controls to connect a standard shortshaft outboard engine. The AquaQuad AQ25 will offer you exceptional levels ofexhilaration and adrenaline without compromising your safety. The low maintenanceand running costs will out perform any similar sized craft such as a jet ski or other PWC.

This is classed as a RIB and not a jet ski so is not caught by jet ski bans in some areas. SPECIFICATIONS Length: 2.8MWidth (Beam): 1.49MHeight: 92 CMWeight: 52 KG (without engine)Draft: 30 CMHorse Power: 10 to 25 HPFuel Tank / Time / Range: 23 litres / 5 Hours / 180 kmTube Buoyancy: 436 litersTop Speed: 55 km/h at sea levelAcceleration: On the plane in under 2 secondsMaximum loading: 225 kg (2 persons)Safety: 4 independent buoyancy chambers This is a 2007 year boat and is in good, used condition. The tubes have beenpatched in 2 places but this has been done professionally. The tubes and valveshold air and do not deflate even after a week or so. There is no trailer or enginewith this boat.

This would fit in a transit van or Ivor Williams P8e trailer or equivalent.At a pinch, it could go on a roof rack but remember it is 52KG. The boat is pictured with the valve covers off so you can see the valve cores.Each valve has it’s own cover and the boat will be supplied with all these in place.The main hull drain plug is present and a good tight fit. The deck area where youplace your feet is self-draining. You will need to replace 2 X four inch hatch coverswhich for some reason have warped over the years. You can see this in the photosof the rear section.

The front hatch cover is absolutely fine. You will need an outboardengine between 10HP and 25HP. All the fittings are present to add the outboard. The outboard could be either manual or electric start and should be the normal,short shaft type (as most outboards are). Deflated, the boat reduces in size to 2.35m long by 1.25M wide.

We now have amuch larger boat and so this is surplus to requirements. You will need to collectfrom Bishopston, Swansea in South Wales. Courier collection is acceptable butyou must pay in advance of collection and YOUR COURIER MUST BE PREPAREDTO LOAD IT BY HIMSELF. It is currently on a wheeled pallet that can transfer itkerbside for loading but this is not included in the sale. Cash on collection is preferred but PAYPAL is also acceptable.