Chinook 5 Meter Double Skin Inflatable Rib & 75hp Mercury With Power Tilt

Unfinished 5m chinook rib project that requires some work to finish, was bought a couple of years ago but due to the purchase of a classic wooden boat I have never had time to get it finished or even use it! Included in the sale is the trailer and the 75Hp Mercury outboard that has power tilt and trim. Since I had it I have tidied up the centre console, had a new battery, had a new drivers seat, had a passenger seat made, gave the engine a new flywheel and lined the floor with boat carpet. Bits still left to do….. 1.slight wiring issue with the power tilt and trim but can be seen working, I think the trim wires need changing from the ignition to the engine as I have already tried a new trim switch. 2.The trailer could do with some welding to strengthen it up a bit. 3.
The trailer needs new wheel bearings but I could arrange this if it goes for the right price. 4. The rib requires quite a few puncture repairs that I never got round to doing, I thought perhaps you could buy some large black pads to cover the top of the tubes as this is mostly where they issues are. 5. One rear valve is completely broken, I thought it could be either replaced or covered over with the glue pads mentioned above … obviously would have to break the divider in side the tube so you would just use the front valve instead. 6. The bung hole bolt needs replacement. 7. The Oil injection on the engine has been bypassed, not sure if this needs fixing as you don’t really need it. 8.
Service the engine and test it as I have only had it ticking over on the drive way. If you like to know any more then please message me. I can possibly arrange delivery depending on the distance. No reserve as just need it gone! Would be a great toy for this season!