Motor Boat Project

The engine has not run for several years, but does turn on a spanner.The trailer is part galvanized, with some surface rust, but is made of sturdy boxed steel construction. It has 8X rollers which I have replacement fittings for, including 16 s/steel U bolts. It's just had two new wheels and tyres fitted at £165. Although used on the Sea, it could also make a great river boat, with a front cabin that converts into a double bed. The front cabin could seat 4-5 people at a squeeze, with a further 2-3 on the blue bench seat.There would also be 2 (not supplied) seats in the main section of the boat- one for the pilot and a spare seat next to it. The picture of the blue bench seat shows how it would look after the back of the seat had been repaired. The main section of the floor has also been replaced with treated ply to repair damage caused over the years. It could be quite easily fiberglassed to finish the repair. The canopy needs some re-stitching and general repair (it has temporary Gorilla tape repairs at this time) The back of the blue bench seat needs the ply replacing.It also used to have lift up front section, which converted the bench into a second bed.There are 8 rollers on the trailer (one of them is shown in the photos with the replacement parts ) the other seven are still on the trailer.