Sailing Yacht Project Ebbtide 33

Ebbtide 33 Sailing Yacht Project had ceased work from August 2016 this is a bereavement sale and unfinished project. Drawings/Blueprints are available. General Condition Survey Report carried out on the 31st August 2016 by Colin Mallard South and I can happily email this survey to whom ever requests to read it. Any questions and arrangments,Feel free to contact me Alex on phone, email email Location is Brandy Hole Moorings Limited, Hullbridge, SS5 6QB (0phone (Justin) 0phone). The vessel is a long keel yacht of steel construction.

To a design by Alan Pape. The vessel is laid out from forward to aft as follows - Chain locker, forecabin, toilet, sallon. Length 10.06M.Breadth 3.10M.Draught mean 1.57M.Displacement approx. 8.5 mt when standard fit out is complete.(The absolute accuracy of these figures in not guaranteed) Engine is Vetus 40HP. New and has been run-up.

Adjustable engine mounts.3 blade bronze propeller on a stainless steel shaft, flange couplings.Fuel Tank in the vessel has a keel integral fuel oil tank of steel construction. Built by unknown in 2004.Welded steel plates with steel unequal angle floors. Steel transom hung rudder. Accommodation and decks in steel. (Steel thickness stated in survey)Steel recently fully shot blasted.Epoxy Bottom/Topside coatings.

Topside coating finished blue enamel. Deck has a Teak look coasting.Custom guard and grab rails ready for install. No Guard wires. Toilet outlet/inlet, self draining cockpit draining to transom, exhaust outlet, engine raw water inlet all plastic in as new condition. Windows all in good order.

Windows strong enough to withstand water pressures in sea areas. Mast sliver anodised, spreader alloy mast and boom. Fully surveyed and examined. No load depression. New sails Main and Genoa.

The vessel was found in re-fit ashore and has never been launched.