Home » Not Specified

Speed Boat, 16 Ft. Nearly Finished Project With Trailer

Location: 
United Kingdom, East Sussex, Rye
Ships to: 
United Kingdom
Current Price: 
 £155 
Quantity: 
1
Condition: 
Used
Listing Type: 
Chinese
Make: 
Not Specified

Length (Feet): 16

Boat Type: Speed Boat

Beam (Feet): 1.8m

Item's Postal Code: 
TN31 ***
Payment Methods: 
PayPal, Pay on pickup
Trailer: 
Included
Engine Type: 
N/A
Primary Fuel Type: 
N/A
Condition Description: 
The boat has been stripped back and cleaned, nearly all the small damage has been repaired, the new floor pieces are cut in marine ply, meeting at a newly built bulkhead. They are not yet fixed in place. The hull needs sanding and painting with very few places needing more resin. The steering was cut out of the dashboard so I have made a new resin covered ply piece to fill the gap. It is a solid boat and I would love to finish the project but I have too many projects. There is no steering and no motor. The trailer has been used for moving it but it only just balances. I drove it for five miles with no trouble as long as it is tied well down at the bows. It has a winch and rubber rollers. These need moving to the right place for this boat but it sat quite well as it is.The tyres are great, there is plenty of paint on it with bits of rust but nothing serious. The front wheel is there but the nut for winding it up and down is gone. The dirtiest and bulk of the work is done on the boat.
Description: 

Speed boat and trailer. Boat is 16 ft long and looks like an Archer but no makers name on the boat. There is a trailer with it that can be used but it is really a bit small and the boat just balances on it. I have used it to tow the boat though. I got the boat after it had slipped its moorings and got a couple of holes on one side ( repair nearly finished ).

I stripped it back completely as the old floors were damaged. I have cut two new marine ply floor pieces but not fixed them as I planned to put flotation under the front part and cut a box for bilges in the stern. I put in a new bulkhead for the floor pieces to meet at and to make the forward section watertight. So most of the repair work is done and there is little needed before sanding and repainting the hull. I have removed the rubber and aluminium bumper in order to get good paint cover but it is in good condition and rivets back onto the boat easily.

The transom is solid and has a few holes in from previous motor mounts so needs filling a bit. The trailer is worth at least £150 on its own if not more so the starting price is very fair.

Returns Accepted: 
Not
A seller's positive feedback score: 
100.00%

Add new question to the seller